Rexroth Hydraulic Cylinder - Mill Type Cylinder รุ่น CS Series กระบอกไฮดรอลิก แบบกระบอกกลม ทำงานทนทานกว่า สินค้าอุปกรณ์ไฮดรอลิกจาก Rexroth สินค้ามาตรฐานโลก ระดับสากล จัดจำหน่ายโดย นิวแอนด์ไฮด์ จำกัด

• 

  รุ่น CSH1

  1. Series H1
  2. Component series 3X
  3. Nominal pressure 250 bar
  4. Piston Ø 40 … 320 mm
  5. Piston rod Ø 22 … 220 mm
  6. Stroke length up to 6000 mm
• 

  รุ่น CGH2

  1. Series H2
  2. Component series 3X
  3. Nominal pressure 250 bar
  4. Piston Ø 40 … 320 mm
  5. Piston rod Ø 25 … 220 mm
  6. Stroke length up to 6000 mm
• 

  รุ่น CSH2...XE

  1. Series H2
  2. Component series 3X
  3. Nominal pressure 250 bar
  4. Piston Ø 40 … 320 mm
  5. Piston rod Ø 25 … 220 mm
  6. Stroke length up to 6000 mm
• 

  รุ่น CSH3

  1. Series H3
  2. Component series 3X
  3. Nominal pressure 350 bar
  4. Piston Ø 40 … 320 mm
  5. Piston rod Ø 28 … 220 mm
  6. Stroke length up to 6000 mm
• 

  รุ่น CSM1

  1. Series M1
  2. Component series 2X
  3. Nominal pressure 160 bar
  4. Piston Ø 40 … 200 mm
  5. Piston rod Ø 28 … 140 mm
  6. Stroke length up to 3000 mm

Hydraulic cylinder, Mill type cylinder

รายละเอียด Hydraulic cylinder, mill type รุ่น CSH1

• Series H1
• Component series 3X
• Nominal pressure 250 bar
• Piston Ø 40 … 320 mm
• Piston rod Ø 22 … 220 mm
• Stroke length up to 6000 mm

Features

• 6 types of mounting
• Self-adjusting and adjustable end position cushioning

Type code

• Only piston Ø 40 … 200 mm
• Trunnion position freely selectable. When ordering, always specify the "XV" dimensions in the plain text in
• For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
• Not possible with MF4
• Piston Ø 40 … 80 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• Piston Ø 63 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• Piston Ø 125 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• Only piston Ø 160 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• Only piston Ø 80 … 320 mm
• 12) Only piston rod Ø 22 … 140 mm
• 13) Not with piston Ø 320 mm
• 14) Not possible with piston rod end "N"
• 15) Subplates for SL and SV valves (isolator valves)
Please note: Seal designs T, G, L, R, S and V are not designed for the static holding function!
• 18) Not standardized
• 19) Only piston rod Ø 28 … 160 mm
• 20) Possible from piston rod Ø 45 mm
• 29) With CSH, by default with guide belts
• 30) All graphical representations in the data sheet show position 1
• 31) With MS2, only position 11 is possible
• 34) With MF4 and line connection B, M or C not possible
• 35) Not possible with MP3
• 38) Marks order-relevant information which cannot be represented in the ordering code. These must be specified for each order.

Order example:
CSH1MP5/100/56/300A3X/T11CAEMZ TCAWW
With order-relevant information:
CSH1MP5/100/56/300A3X/T11CAEMZ TCAWW-P

Hydraulic cylinder, Mill type cylinder

รายละเอียด Hydraulic cylinder, mill type รุ่น CSH2

• Series H2
• Component series 3X
• Nominal pressure 250 bar
• Piston Ø 40 … 320 mm
• Piston rod Ø 25 … 220 mm
• Stroke length up to 6000 mm

Features

• Standards: DIN 24333, ISO 6022
• 6 types of mounting
• Self-adjusting and adjustable end position cushioning

Type code

01	Single rod cylinder with position measurement system		CS 17)
02	Series		H2
Types of mounting
03	Swivel eye at cylinder base		MP3
	Self-aligning clevis at cylinder base		MP5
	Round flange at the cylinder head		MF3
	Round flange at the cylinder base		MF4
	Trunnion		MT4 1)
	Foot mounting		MS2
04	Piston Ø (ØAL) 40 … 320 mm		...
05	Piston rod Ø (ØMM) 25 … 220 mm		...
06	Stroke length in mm2)		...
Design principle
07	Head and base flanged		A
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	According to ISO 1179-1 (pipe thread ISO 228-1)		B
	According to ISO 9974-1 (metric thread ISO 261)		M 32)
	Flange connection according to ISO 6162-1 tab. 2 type 1 (≙ SAE 3000 PSI)		F 3; 20)
	Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI)		D 3; 8)
	Flange connection according to ISO 6164 tab. 1		K 3)
	Flange connection according to ISO 6164 tab. 2		H 3)
	according to ISO 1179-1 (pipe thread ISO 228-1) with flat pipe flange		C 30)
	For directional and high-response valves	Subplate NG6	P3; 4)
		Subplate NG10	T3; 5)
		Subplate NG16	U3; 6)
		Subplate NG25	V3; 31)
	For SL and SV valves	Subplate NG6	A3; 4; 14)
		Subplate NG10	E3; 5; 14)
		Subplate NG20	L3; 6; 14)
		Subplate NG30	N3; 14; 31)
Line connection/position at cylinder head
10	View to piston rod29)		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod29)		1
			2
			3
			4
Piston rod design
12	Hard chromium-plated		C
	Hardened and hard chromium-plated		H 38)
	Nickel-plated and hard chromium-plated		N 18)
Piston rod end
13	Thread for swivel head CGKD		H
	With mounted swivel head CGKD		F
End position cushioning
14	Without end position cushioning		U
	Both sides, adjustable		E 19)
Seal design
15	For mineral oil HL, HLP and oil-in-water emulsion HFA	Standard seal system	M 28)
		Standard seal system with guide rings	L
		Reduced friction heavy industry	R 28)
	For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC	Standard seal system HFC	G 28)
		Servo quality/reduced friction	T 28)
	For HDFR phosphate ester and HFDU polyol ester	Servo quality/reduced friction	S 28)
		Standard seal system FKM	V 28)
Option
16	Additional options, fill fields for additional options		Z

• Trunnion position freely selectable. When ordering, always specify the "XV" dimensions in the plain text in mm
• For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
• Not possible with MF4
• Piston Ø 40 … 80 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• Piston Ø 63 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• Piston Ø 125 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• Only piston Ø 80 … 320 mm
• 14) Subplates for SL and SV valves (isolator valves)
Please note: Seal designs T, G, L, R, S and V are not designed for the static holding function!
• 17) Not standardized
• 18) Only piston rod Ø 28 … 160 mm
• 19) Possible from piston rod Ø 45 mm
• 20) Only piston Ø 63 … 200 mm
• 28) With CSH, by default with guide belts
• 29) All graphical representations in the data sheet show position 1
• 30) With MS2, only position 11 is possible
• 31) Piston Ø 180 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 32) Version does not comply with ISO 6022
• 37) Marks order-relevant information which cannot be represented in the ordering code. These must be specified for each order.
• 38) Only piston rod Ø 25 … 140 mm

Order examples:
CSH2MP5/100/70/500A3X/B11CHUTZ TFABW
With order-relevant information:
CSH2MP5/100/70/500A3X/B11CHUTZ TFABW-P

Hydraulic cylinders for potentially explosive areas

รายละเอียด Hydraulic cylinders รุ่น CSH2...XE

• Series H2
• Component series 3X
• Nominal pressure 250 bar
• Piston Ø 40 … 320 mm
• Piston rod Ø 25 … 220 mm
• Stroke length up to 6000 mm

Features

• Standards: DIN 24333, ISO 6022
• 4 types of mounting

Type code

01	Single rod cylinder with position measurement system		CS 18)
02	Series		H2
Types of mounting
03	Swivel eye at cylinder base		MP3 34)
	Self-aligning clevis at cylinder base		MP5 34)
	Round flange at the cylinder head		MF3
	Round flange at the cylinder base		MF4
	Trunnion		MT4 2)
	Foot mounting		MS2 18)
04	Piston Ø (ØAL) 40 … 320 mm		...
05	Piston rod Ø (ØMM) 28 … 220 mm		...
06	Stroke length in mm3)		...
Protection class for ATEX version
07	Increased safety		XE
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	According to ISO 1179-1 (pipe thread ISO 228-1)		B
	According to ISO 9974-1 (metric thread ISO 261)		M 33)
	Flange connection according to ISO 6162-1 tab. 2 type 1 (≙ SAE 3000 PSI)		F4; 21)
	Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI)		D4; 9)
	Flange connection according to ISO 6164 tab. 1		K1; 4)
	Flange connection according to ISO 6164 tab. 2		H 4)
Line connection/position at cylinder head
10	View to piston rod30)		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod30)		1
			2
			3
			4
Piston rod design
12	Hard chromium-plated		C
	Nickel-plated and hard chromium-plated		N 19)
Piston rod end
13	Thread for swivel head CGKD		H
	With mounted swivel head CGKD		F
End position cushioning
14	Without end position cushioning		U
	Both sides, adjustable		E 20)
Seal design
15	For mineral oil HL, HLP and oil-in-water emulsion HFA	Standard seal system	M 29)
	For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC	Servo quality/reduced friction	T 29)
	For phosphoric acid esters HFR	Servo quality/reduced friction	S 29)
Option
16	Additional options, fill fields for additional options		Z

• Only piston Ø 40 … 200 mm
• Trunnion position freely selectable. When ordering, always specify the "XV" dimensions in the plain text in mm
• For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
• Not possible with MF4
• 9) Only piston Ø 80 … 320 mm
• 18) Not standardized
• 19) Only piston rod Ø 28 … 160 mm
• 20) Possible from piston rod Ø 45 mm
• 21) Only piston Ø 63 … 200 mm
• 29) With CSH2…XE, by default with guide belts
• 30) All graphical representations in the data sheet show position 1
• 33) Version does not comply with ISO 6022
• 34) Only upon request

Order examples:
CSH2MF3/100/70/500XE3X/B11CHUTZ TFABW

Hydraulic cylinder, Mill type cylinder

รายละเอียด Hydraulic cylinder, mill type รุ่น CSH3

• Series H3
• Component series 3X
• Nominal pressure 350 bar
• Piston Ø 40 … 320 mm
• Piston rod Ø 28 … 220 mm
• Stroke length up to 6000 mm

Features

• 6 types of mounting
• Self-adjusting and adjustable end position cushioning

Type code

01	Single rod cylinder with position measurement system		CS 18)
02	Series		H3
Types of mounting
03	Swivel eye at cylinder base		MP3 1)
	Self-aligning clevis at cylinder base		MP5
	Round flange at the cylinder head		MF3
	Round flange at the cylinder base		MF4
	Trunnion		MT4 2)
	Foot mounting		MS2
04	Piston Ø (ØAL) 40 … 320 mm		...
05	Piston rod Ø (ØMM) 28 … 220 mm		...
06	Stroke length in mm3)		...
Design principle
07	Head and base flanged		A
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	According to ISO 1179-1 (pipe thread ISO 228-1)		B
	According to ISO 9974-1 (metric thread ISO 261)		M
	Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI)		D 4; 25)
	Flange connection according to ISO 6164 tab. 2		H 4)
	according to ISO 1179-1 (pipe thread ISO 228-1) with flat pipe flange		C 31)
	For directional and high-response valves	Subplate NG6	P4; 5; 27)
		Subplate NG10	T4; 6; 27)
		Subplate NG16	U4; 7; 27)
		Subplate NG25	V4; 7; 27)
	For SL and SV valves	Subplate NG6	A4; 5; 15; 27)
		Subplate NG10	E4; 6; 15; 27)
		Subplate NG20	L4; 7; 15; 27)
		Subplate NG30	N4; 7; 15; 27)
Line connection/position at cylinder head
10	View to piston rod30)		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod30)		1
			2 34)
			3
			4 34)
Piston rod design
12	Hard chromium-plated		C
	Nickel-plated and hard chromium-plated		N 19)
Piston rod end
13	Thread for swivel head CGAS		A
	Thread for swivel head CGA, CGAK, plain clevis CSA		G 26)
	With mounted swivel head CGAS		S
	With mounted swivel head CGA		L 26)
	With mounted swivel head CGAK		M 26)
	With mounted plain clevis CSA		N 1)
End position cushioning
14	Without end position cushioning		U
	Both sides, adjustable		E 20)
Seal design
15	For mineral oil HL, HLP and oil-in-water emulsion HFA	Standard seal system	M 29)
		Standard seal system with guide rings	L
		Reduced friction heavy industry	R 29)
	For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC	Standard seal system HFC	G 27; 29)
		Servo quality/reduced friction	T 29)
	For HDFR phosphate ester and HFDU polyol ester	Servo quality/reduced friction	S 29)
		Standard seal system FKM	V 27; 29)
Option
16	Additional options, fill fields for additional options		Z

• Only piston Ø 40 … 200 mm
• Trunnion position freely selectable. When ordering, always specify the "XV" dimensions in the plain text in mm
• For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
• Not possible with MF4
• Piston Ø 40 … 80 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• Piston Ø 63 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• Piston Ø 125 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 14) Not possible with piston rod end "N"
• 15) Subplates for SL and SV valves (isolator valves)
Please note: Seal designs T, G, L, R, S and V are not designed for the static holding function!
• 18) Not standardized
• 19) Only piston rod Ø 28 … 160 mm
• 20) Possible from piston rod Ø 45 mm
• 25) Only piston Ø 63 … 320 mm
• 26) Only piston Ø 40 … 250 mm
• 27) Maximum operating pressure 315 bar
• 29) With CSH, by default guide belts
• 30) All graphical representations in the data sheet show position 1
• 31) With MS2, only position 11 is possible
• 34) With MF4 and line connection B, M or C not possible
• 35) Not possible with MP3
• 38) Marks order-relevant information which cannot be represented in the ordering code. This must be specified for each order.

Order examples:
CSH3MP5/100/70/300A3X/B11CAUMZ TFAWW
With order-relevant information:
CSH3MP5/100/70/300A3X/B11CAUMZ TFAWW-P

Hydraulic cylinder, Mill type cylinder

รายละเอียด Hydraulic cylinder, mill type รุ่น CSM1

• Series M1
• Component series 2X
• Nominal pressure 160 bar
• Piston Ø 40 … 200 mm
• Piston rod Ø 28 … 140 mm
• Stroke length up to 3000 mm

Features

• Installation dimensions according to ISO 6020/1 and VW 39 D 920
• 9 types of mounting
• Self-adjusting and adjustable end position cushioning

Type code

01	Single rod cylinder		CS 1)
02	Series		M1
Types of mounting
03	Rectangular flange at cylinder head		MF1 2)
	Round flange at the cylinder head		MF3
	Swivel eye at cylinder base		MP3
	Self-aligning clevis at cylinder base		MP5
	Trunnion		MT4 3)
	Foot mounting		MS2
04	Piston Ø (ØAL) from 25 … 200 mm; see Technical data		...
05	Piston rod Ø (ØMM) 28 … 140 mm; see Technical data		...
06	Stroke length in mm		...
Design principle
07	Head and base flanged		A
08	Component series 20 … 29 (20 … 29: unchanged installation and connection dimensions)		2X
Line connection / version
09	Pipe thread according to ISO 1179-1		B
	Metric ISO thread (DIN/ISO 6149-1)		R
	Enlarged pipe thread according to ISO 1179-1; see Dimensions		S 4)
	Rectangular flange connection according to ISO 6162; see Dimensions		F 6)
	Square flange connection according to ISO 6164; see Dimensions		H
	For directional and high-response valves; see Dimensions	Subplate NG6	P5; 7; 10)
		Subplate NG10	T5; 8; 10)
		Subplate NG16	U5; 9; 10)
	For SL and SV valves12); see Dimensions	Subplate NG6	A5; 7; 10)
		Subplate NG10	E5; 8; 10)
		Subplate NG20	L5; 9; 10)
Line connection/position at cylinder head
10	View to piston rod14)		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod14)		1
			2
			3
			4
Piston rod design
12	Hard chromium-plated		C
	Stainless steel, hard chromium-plated		L
Piston rod end
13	Thread (ISO 6020-1) for swivel head CGKD		G
	Thread (VW standard) for swivel head CGKD		H 13)
	Internal thread; see dimensions		E
	Piston rod end “H” with mounted swivel head CGKD		F 13)
	Piston rod end “G” with mounted swivel head CGKD		K
End position cushioning
14	Without end position cushioning		U
	Both sides, adjustable		E 11)
Seal design
15	Suitable for mineral oil according to DIN 51524 HL, HLP	Standard seal system	M
		Servo quality/reduced friction	T
	Suitable for phosphoric acid esters HFR	Servo quality/reduced friction	S
Option 1
16	Position measurement system, magnetostrictive without mating connector, mating connector ‒ separate order, see Technical data		T
Option 2
17	Analog output 4 … 20 mA		C
	Analog output 0 … 10 V		F
	Digital output SSI		D

• 1)Not standardized
• 2) Piston Ø 40 … 125 mm
• 3) When ordering, always specify the "XV" dimensions in the plain text in mm (see order example)
• 4) Piston Ø 63 … 200 mm
• 5) Not for MF2; MF4
• 6) Piston Ø 50 … 200 mm
• 7) Piston Ø 40 … 80 mm, only position 11
• 8) Piston Ø 63 … 200 mm, only position 11
• 9) Piston Ø 125 … 200 mm, only position 11
• 10) Subplates only possible with pipe thread (ISO 1179-1)
• 11) Piston Ø 80 … 200 mm
• 12) Subplates for SL and SV valves (isolator valves)
Please note: Seal designs T and S are not designed for the static holding function!
• 13) Per piston Ø only possible with large piston rod Ø
• 14) All graphical representations in the data sheet show position 1

Order example:
CSM1MT4/50/36/300A2X/B11CHUMTC, XV = 175 mm

General notices
Series CSM1…2X is based on series CDM1…2X (according to ISO 6020/1).
To series CSM1…2X, the same general notices apply as to series CDM1…2X.
Dimensional and/or type code variations resulting due to the integrated position measurement system are specified on the pages for the dimensions.