Hydraulic cylinder, mill type รุ่น CSH2

Hydraulic cylinder, Mill type cylinder

CD CG CS
Hydraulic cylinder, mill type รุ่น CSH2

รายละเอียด Hydraulic cylinder, mill type รุ่น CSH2

  • Series H2
  • Component series 3X
  • Nominal pressure 250 bar
  • Piston Ø 40 … 320 mm
  • Piston rod Ø 25 … 220 mm
  • Stroke length up to 6000 mm

Features

  • Standards: DIN 24333, ISO 6022
  • 6 types of mounting
  • Self-adjusting and adjustable end position cushioning

Type code

010203 04 05 060708 0910111213141516
CS H2   /   /   /   A 3X /               Z

01 Single rod cylinder with position measurement system CS 17)
02 Series H2
Types of mounting
03 Swivel eye at cylinder base MP3
Self-aligning clevis at cylinder base MP5
Round flange at the cylinder head MF3
Round flange at the cylinder base MF4
Trunnion MT4 1)
Foot mounting MS2
04 Piston Ø (ØAL) 40 … 320 mm ...
05 Piston rod Ø (ØMM) 25 … 220 mm ...
06 Stroke length in mm2) ...
Design principle
07 Head and base flanged A
08 Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions) 3X
Line connection / version
09 According to ISO 1179-1 (pipe thread ISO 228-1) B
According to ISO 9974-1 (metric thread ISO 261) M 32)
Flange connection according to ISO 6162-1 tab. 2 type 1 (≙ SAE 3000 PSI) F 3; 20)
Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI) D 3; 8)
Flange connection according to ISO 6164 tab. 1 K 3)
Flange connection according to ISO 6164 tab. 2 H 3)
according to ISO 1179-1 (pipe thread ISO 228-1) with flat pipe flange C 30)
For directional and high-response valves Subplate NG6 P3; 4)
Subplate NG10 T3; 5)
Subplate NG16 U3; 6)
Subplate NG25 V3; 31)
For SL and SV valves Subplate NG6 A3; 4; 14)
Subplate NG10 E3; 5; 14)
Subplate NG20 L3; 6; 14)
Subplate NG30 N3; 14; 31)
Line connection/position at cylinder head
10 View to piston rod29) cd cg cs symbol1 01 1
2
3
4
Line connection/position at cylinder base
11 View to piston rod29) cd cg cs symbol1 02 1
2
3
4
Piston rod design
12 Hard chromium-plated C
Hardened and hard chromium-plated H 38)
Nickel-plated and hard chromium-plated N 18)
Piston rod end
13 Thread for swivel head CGKD H
With mounted swivel head CGKD F
End position cushioning
14 Without end position cushioning U
Both sides, adjustable E 19)
Seal design
15 For mineral oil HL, HLP and oil-in-water emulsion HFA Standard seal system M 28)
Standard seal system with guide rings L
Reduced friction
heavy industry
R 28)
For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC Standard seal system HFC G 28)
Servo quality/reduced friction T 28)
For HDFR phosphate ester and HFDU polyol ester Servo quality/reduced friction S 28)
Standard seal system FKM V 28)
Option
16 Additional options, fill fields for additional options Z
Fields for additional options
    17 18 19 20 21  
Z           -P 37)
17 Position measurement system, magnetostrictive without mating connector, mating connector ‒ separate order, see Technical data T
18 Analog output 4 … 20 mA C
Analog output 0 … 10 V F
Digital output SSI D
Profibus D63 N
Profibus D53 P
19 Measuring coupling, on both sides A
Without measuring coupling W
20 Spherical bearing, maintenance-free A13; 34)
Flanged grease nipple B
Standard conical grease nipple W
21 Piston rod extension “LY”, specify in mmin plain text Y
Without piston rod extension W
  • Trunnion position freely selectable. When ordering, always specify the "XV" dimensions in the plain text in mm
  • For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
  • Not possible with MF4
  • Piston Ø 40 … 80 mm, only position 11, subplates only possible in combination with line connection “B” at the head
  • Piston Ø 63 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
  • Piston Ø 125 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
  • Only piston Ø 80 … 320 mm
  • 14) Subplates for SL and SV valves (isolator valves)
  • Please note: Seal designs T, G, L, R, S and V are not designed for the static holding function!
  • 17) Not standardized
  • 18) Only piston rod Ø 28 … 160 mm
  • 19) Possible from piston rod Ø 45 mm
  • 20) Only piston Ø 63 … 200 mm
  • 28) With CSH, by default with guide belts
  • 29) All graphical representations in the data sheet show position 1
  • 30) With MS2, only position 11 is possible
  • 31) Piston Ø 180 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
  • 32) Version does not comply with ISO 6022
  • 37) Marks order-relevant information which cannot be represented in the ordering code. These must be specified for each order.
  • 38) Only piston rod Ø 25 … 140 mm

Order examples:
CSH2MP5/100/70/500A3X/B11CHUTZ TFABW
With order-relevant information:
CSH2MP5/100/70/500A3X/B11CHUTZ TFABW-P


ติดต่อ Rexroth / งานโปรเจ็ค / กระบอกไฮดรอลิก / งานซ่อม และงานบริการ

Rexroth contact
ดาว์นโหลด แคตตาล็อก, สเป้กแอร์แทค
Promotion-Big Sale
ติดต่อเรา
TICTechnology Instrument 
www.tic.co.th
tupackT.U Pack 
www.tupack.co.th
Your LiftYour Lift 
www.yourlift.co.th