Rexroth Hydraulic Cylinder - Tie Rod Cylinder รุ่น CG Series กระบอกไฮดรอลิก แบบกระบอกสี่เสารั้ง สินค้าอุปกรณ์ไฮดรอลิกจาก Rexroth สินค้ามาตรฐานโลก ระดับสากล จัดจำหน่ายโดย นิวแอนด์ไฮด์ จำกัด ตัวแทนจำหน่ายอย่างเป็นทางการในประเทศไทยของ Rexroth (Rexroth Thailand)

• 

  รุ่น CG70

  1. Series 70
  2. Component series 1X
  3. Nominal pressure 70 bar
  4. Piston Ø 25 … 200 mm
  5. Piston rod Ø 12 … 140 mm
  6. Stroke length up to 3000 mm
• 

  รุ่น CG210

  1. Series 210
  2. Component series 1X
  3. Nominal pressure 210 bar
  4. Piston Ø 40 … 200 mm
  5. Piston rod Ø 16 … 140 mm
  6. Stroke length up to 3000 mm
• 

  รุ่น CGT3...Z-3X

  1. Series T3
  2. Component series 3X
  3. Nominal pressure 160 bar
  4. Piston Ø 25 … 200 mm
  5. Piston rod Ø 12 … 140 mm
  6. Stroke length up to 3000 mm

Hydraulic cylinder tie rod design

รายละเอียด Hydraulic cylinder รุ่น CG70

• Series 70
• Component series 1X
• Nominal pressure 70 bar
• Piston Ø 25 … 200 mm
• Piston rod Ø 12 … 140 mm
• Stroke length up to 3000 mm

Features

• 9 types of mounting

Type code

01	Double rod cylinder		CG
02	Series		70
Types of mounting
03	Rectangular flange at cylinder head		C 2)
	Square flange at cylinder head		H
	Trunnion at cylinder head		R 1)
	Trunnion in cylinder center		E 3)
	Foot mounting		F
	Foot mounting with fitting key		L 2)
	Foot mounting with seal ring sealing for subplate mounting		M
	Tapped holes in cylinder head and base		N
	Extended tie rod at cylinder head		P
04	Piston Ø (ØAL) 25 … 200 mm		...
05	Piston rod Ø (ØMM) 12 … 140 mm		...
06	Stroke length in mm4)		...
Design principle
07	Cylinder head and cylinder base connected by tie rod		Z
08	Component series 11 … 19 (11 … 19: unchanged installation and connection dimensions)		1X
Line connection / version
09	Flange connection with seal ring sealing; only possible with “M” type of mounting		00
	Pipe thread according to ISO 228/1		01 10)
	Metric ISO thread		02 10)
	Enlarged line connection; pipe thread according to ISO 228/1		13 5; 10)
	Enlarged line connection; metric ISO thread		14 5; 10)
Piston rod design
10	Hardened and hard chromium-plated		H
	Hard chromium-plated, from piston Ø ≥ 80 mm		C 6)
Piston rod end
11	external thread		B
	external thread		C
	Internal thread		E 7)
	Thread for swivel head		F
	With mounted swivel head CGK		T
End position cushioning
12	Without		U
	Base side		K
	Head side		S
	Both sides		D
Hydraulic fluid
13	Seals, suitable for mineral oil according to DIN 51524 (HL, HLP)		M
	FKM seals suitable for phosphate ester (HFDR)		V
Line connection/position at cylinder head
14	Enter position; observe the “position of the line connections” notices! View to piston rod8)		1
			2
			3
			4
Line connection/position at cylinder base
15	Enter position; observe the “position of the line connections” notices! View to piston rod8)		1
			2
			3
			4
Seals
16	Standard version		A
	Design for low-friction operation		T
17	Enter support width extension		…
18	Further details in the plain text 9)		*

• 1) Not possible for piston Ø 25 mm0.98 in
• 2) Not possible for piston Ø 200 mm7.87 in
• 3) Position of trunnion freely selectable. When ordering, always specify the dimension "XV" in the plain text in mminch. With piston Ø 25 mm0.98 in, the trunnions are at the cylinder head.
• 4) Observe the admissible stroke length, see “Admissible stroke lengths” in the project planning information.
• 5) See dimensions.
• 6) Not possible with piston rod end “E”.
• 7) Not possible with piston rod Ø 12 mm0.47 in.
• 8) All graphical representations in the data sheet show position 1.
• 9) Always specify the attachment of inductive proximity switches or piston rod extensions “LY” in the order in the plain text.
• 10) Not possible with type of mounting “M”.

Order example:
G70C50/22-200Z1X/01HBDM1-1A
With special versions, an “X” will be inserted in the type key at the corresponding position and an SO number will be amended at the end.

Hydraulic cylinder, tie rod design

รายละเอียด Hydraulic cylinder รุ่น CG210

• Series 210
• Component series 1X
• Nominal pressure 210 bar
• Piston Ø 40 … 200 mm
• Piston rod Ø 16 … 140 mm
• Stroke length up to 3000 mm

Features

• Service-friendly modular system
• 9 types of mounting

Type code

Hydraulic cylinder tie rod design

รายละเอียด Hydraulic cylinder รุ่น CGT3...Z-3X

• Series T3
• Component series 3X
• Nominal pressure 160 bar
• Piston Ø 25 … 200 mm
• Piston rod Ø 12 … 140 mm
• Stroke length up to 3000 mm

Features

• Installation dimension acc. to ISO 6020/2, DIN 24554 and NF/ISO 6020/2
• 7 types of mounting
• Integrated guide socket for fast and easy maintenance
• Optional self-adjusting or adjustable end position cushioning
• Patented safety bleeding device for easy and safe bleeding
• Easy assembly thanks to freely selectable position of the line connections at cylinder head and cylinder base

Type code

01	Double-acting cylinder10)		CG
02	Series		T3
Types of mounting
03	Types of mounting DIN/ISO	Rectangular flange at cylinder head	ME5
		Foot mounting	MS2
		Trunnion in center	MT4 1)
	Types of mounting ISO	Trunnion at cylinder head	MT1
		Extended tie rod, on both sides	MX1
		Extended tie rod at cylinder head	MX3
		Tapped hole at cylinder head	MX5
04	Piston Ø (ØAL) 25 … 200 mm		...
05	Piston rod Ø (ØMM) 12 … 140 mm13)		...
06	Stroke length in mm14)		...
Design principle
07	Cylinder head and cylinder base connected by tie rod		Z
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	Pipe thread according to ISO 1179-1		B
	Metric ISO thread (ISO 6149-1)		R 17)
	Enlarged pipe thread (ISO 1179-1)		S
Line connection/position at cylinder head
10	View to piston rod		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod		1
			2
			3
			4
Piston rod design
12	Hardened and hard chromium-plated		H
Piston rod end
13	Thread (DIN/ISO) for swivel head CGKA		H
	Thread (ISO) for swivel head CGKA		D
	Internal thread		E 12)
	With mounted swivel head CGKA (DIN/ISO)		F 5)
	With mounted swivel head CGKA (ISO)		K 5)
End position cushioning
14	Without end position cushioning		U
	Both sides, self-adjusting		D
	Both sides, adjustable		E 4)
Seal design
15	Standard seal system		M
	Servo quality/reduced friction		T
	High temperature with reduced friction		S
Option 1
16	Without option		W
	Leakage oil connection		B3; 4; 16)
	Threaded coupling, on both sides		A
Option 2
17	Without option		W
	Piston rod extension “LY”, specify in mmin plain text		Y
18	Further details in the plain text		...

• 1) Trunnion position freely selectable. When ordering, always specify the dimensions “XV” in mm in the plain text
• 3) Not possible with type of mounting MS2 and piston Ø 25 mm and end position cushioning “E”
• 4) With piston Ø 25 … 100 mm: only line connection “B” possible. With piston Ø 125 … 200 mm: only DIN types of mounting and line connection “B” possible.
• 5) Not possible with type of mounting MX1 and MX3
• 10) Not standardized
• 12) See dimensions - Piston rod end E (Only possible with standardized piston rod Ø 18 … 140 mm, observe max. operating pressure.
• 14) For max. available stroke length, see technical data, and for admissible stroke length (according to the kinking calculation), see project planning information.
• 16) Not possible with MT1
• 17) For type of mounting ME5 and ME6, only position 1 and 3 possible

Order examples:
CGT3ME5/80/56/400Z3X/B11HHDMWW
Please observe the relevant restrictions when selecting!