Hydraulic cylinder รุ่น CGT3...Z-3X

Hydraulic cylinder tie rod design

รายละเอียด Hydraulic cylinder รุ่น CGT3...Z-3X

• Series T3
• Component series 3X
• Nominal pressure 160 bar
• Piston Ø 25 … 200 mm
• Piston rod Ø 12 … 140 mm
• Stroke length up to 3000 mm

Features

• Installation dimension acc. to ISO 6020/2, DIN 24554 and NF/ISO 6020/2
• 7 types of mounting
• Integrated guide socket for fast and easy maintenance
• Optional self-adjusting or adjustable end position cushioning
• Patented safety bleeding device for easy and safe bleeding
• Easy assembly thanks to freely selectable position of the line connections at cylinder head and cylinder base

---

Type code

01	02	03		04		05		06	07	08	09	10	11	12	13	14	15	16	17	18
CG	T3		/		/		/		Z	3X										*

01	Double-acting cylinder10)		CG
02	Series		T3
Types of mounting
03	Types of mounting DIN/ISO	Rectangular flange at cylinder head	ME5
		Foot mounting	MS2
		Trunnion in center	MT4 1)
	Types of mounting ISO	Trunnion at cylinder head	MT1
		Extended tie rod, on both sides	MX1
		Extended tie rod at cylinder head	MX3
		Tapped hole at cylinder head	MX5
04	Piston Ø (ØAL) 25 … 200 mm		...
05	Piston rod Ø (ØMM) 12 … 140 mm13)		...
06	Stroke length in mm14)		...
Design principle
07	Cylinder head and cylinder base connected by tie rod		Z
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	Pipe thread according to ISO 1179-1		B
	Metric ISO thread (ISO 6149-1)		R 17)
	Enlarged pipe thread (ISO 1179-1)		S
Line connection/position at cylinder head
10	View to piston rod		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod		1
			2
			3
			4
Piston rod design
12	Hardened and hard chromium-plated		H
Piston rod end
13	Thread (DIN/ISO) for swivel head CGKA		H
	Thread (ISO) for swivel head CGKA		D
	Internal thread		E 12)
	With mounted swivel head CGKA (DIN/ISO)		F 5)
	With mounted swivel head CGKA (ISO)		K 5)
End position cushioning
14	Without end position cushioning		U
	Both sides, self-adjusting		D
	Both sides, adjustable		E 4)
Seal design
15	Standard seal system		M
	Servo quality/reduced friction		T
	High temperature with reduced friction		S
Option 1
16	Without option		W
	Leakage oil connection		B3; 4; 16)
	Threaded coupling, on both sides		A
Option 2
17	Without option		W
	Piston rod extension “LY”, specify in mmin plain text		Y
18	Further details in the plain text		...

• 1) Trunnion position freely selectable. When ordering, always specify the dimensions “XV” in mm in the plain text
• 3) Not possible with type of mounting MS2 and piston Ø 25 mm and end position cushioning “E”
• 4) With piston Ø 25 … 100 mm: only line connection “B” possible. With piston Ø 125 … 200 mm: only DIN types of mounting and line connection “B” possible.
• 5) Not possible with type of mounting MX1 and MX3
• 10) Not standardized
• 12) See dimensions - Piston rod end E (Only possible with standardized piston rod Ø 18 … 140 mm, observe max. operating pressure.
• 14) For max. available stroke length, see technical data, and for admissible stroke length (according to the kinking calculation), see project planning information.
• 16) Not possible with MT1
• 17) For type of mounting ME5 and ME6, only position 1 and 3 possible

Order examples:
CGT3ME5/80/56/400Z3X/B11HHDMWW
Please observe the relevant restrictions when selecting!

---