OMRON Photomicro Sensor - EE-SPX303N / SPX403N

English

ไทย

Photomicro Sensor - EE-SPX303N / SPX403N

DOWNLOAD PDF

Model Numbers

Specifications

Dimensions

Features

Model Numbers | Photomicro Sensor - EE-SPX303N / SPX403N

Sensors

Appearance	Sensing method	Sensing distance (slot width)	Output type	Output configuration	Model
	Through-beam type (with slot)	13 mm (slot width) (Infrared light)	NPN output	Dark-ON	EE-SPX303N
	Through-beam type (with slot)	13 mm (slot width) (Infrared light)	NPN output	Light-ON	EE-SPX403N

Accessories (Order Separately)

Type		Cable length	Model
Connector	Connector		EE-1001
	Connector		EE-1009 *
	Connector with Cable	1 m	EE-1006 1M
		1 m	EE-1010 1M *
		2 m	EE-1006 2M
		2 m	EE-1010 2M *
	Connector with Robot Cable	1 m	EE-1010-R 1M *
	Connector with Robot Cable	2 m	EE-1010-R 2M *
NPN/PNP Conversion Connector		0.46 m (total length)	EE-2002

Note: Refer to EE-[] Catalog for details.
*EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.

Specifications | Photomicro Sensor - EE-SPX303N / SPX403N

Models	EE-SPX303N, EE-SPX403N
Sensing distance	13 mm (slot width)
Sensing object	Opaque: 2.2 × 0.5 mm min.
Differential distance	0.05 mm max.
Light source	Infrared LED (pulse lighting) with a peak wavelength of 940 nm
Indicator	Light indicator (red)
Supply voltage	12 to 24 VDC ±10%, ripple (p-p): 5% max.
Current consumption	15 mA max.
Control output	NPN voltage output: Load power supply voltage: 12 to 24 VDC Load current: 80 mA max. OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 2.0 V max. 10 mA load current with a residual voltage of 1.0 V max.
Protection circuits	Power supply reverse polarity protection, Output reverse polarity protection
Response frequency *	100 Hz min.
Ambient illumination	3,000 lx max. with incandescent light or sunlight on the surface of the receiver.
Ambient temperature range	Operating: -10 to +55°C Storage: -25 to +65°C
Ambient humidity range	Operating: 5% to 85% Storage: 5% to 95%
Vibration resistance	Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions
Shock resistance	Destruction: 500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection	IEC IP50
Connecting method	Special connector (soldering not possible)
Weight	Approx. 4 g
Material	Polycarbonate

* The response frequency was measured by detecting the following rotating disk.

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.

EE-SPX303N, EE-SPX403N EE-SPX303N, EE-SPX403N Dimensions

Features | Photomicro Sensor - EE-SPX303N / SPX403N

Noise resistance equivalent to photomicrosensors with built-in amplifiers.
Resistance to common noise at least 30 times that of previous models.
Resistance to inverter noise at least 10 times that of previous models.
Reverse polarity protection built in.

Properties | Photomicro Sensor - EE-SPX303N / SPX403N

Photomicro Sensor	EE-SPX303N / SPX403N
Sensing distance	13 mm
Power supply voltage	12 – 24 VDC
Current consumption	15 mA max.
Response frequency	100 Hz min
Degree of protection	IP50
Materials	Polycarbonate

Photomicro Sensor - EE-SPX303N / SPX403N

ดาวน์โหลด PDF

คุณสมบัติ | Photomicro Sensor - EE-SPX303N / SPX403N

กันสัญญาณรบกวนเทียบเท่ากับเซนเซอร์โฟไมโครโต้ที่มีแอมพลิฟายเออร์ในตัว
กันสัญญาณรบกวนธรรมดาอย่างน้อย 30 เท่าของรุ่นก่อน
กันสัญญาณรบกวนของอินเวอร์เตอร์อย่างน้อย 10 เท่าของรุ่นก่อน
ป้องกันกระแสไฟฟ้าย้อนกลับในตัว

ข้อมูลจำเพาะ | Photomicro Sensor - EE-SPX303N / SPX403N

Photomicro Sensor	EE-SPX303N / SPX403N
ระยะตรวจจับ	13 มม.
แรงดันไฟฟ้า	12 - 24 VDC
การใช้กระแสไฟฟ้า	สูงสุด 15 มิลลิแอมป์
ความถี่ตอบสนอง	100 เฮิร์ทซ์นาที
ระดับการป้องกัน	IP50
วัสดุ	โพลีคาร์บอเนต