กระบอกลม กระบอกสูบ Air Cylinder SIF, SCF Series (with valve) (เลิกผลิต)
รุ่นสินค้าแนะนำ
เลิกผลิต
![กระบอกลม กระบอกสูบ Air Cylinder รุ่น SCF-SIF Series SCF-SIF](/images/Products/AirTAC/AirTAC-Cylinder/Standard-Cylinders/SIF-SCF-Series/SCF-SIF.jpg)
Standard Cylinders
กระบอกลม กระบอกสูบรุ่นมาตรฐาน รุ่น SIF, SCF Series
กระบอกลม กระบอกสูบ Air Cylinder รุ่น SCF, SIF (SCF, SIF Series) (with valve) กระบอกลมพร้อมวาล์วติดตั้งในตัว Standard Cylinder with Valve Type
- กระบอกลม รุ่น SCF: กระบอกลมทำงานสองทาง แบบสี่เสารั้ง พร้อมวาล์วติดตั้งในตัว Double Acting with Valve Type (Tie-Rod Cylinder)
- กระบอกลม รุ่น SIF: กระบอกลมทำงานสองทาง แบบโปรไฟล์ พร้อมวาล์วติดตั้งในตัว Double Acting with Valve Type (Profile Cylinder)
![airtac](/images/Products/Brand/airtac.jpg)
สัญลักษณ์ (Symbol) กระบอกลม กระบอกสูบ รุ่น SIF, SCF Series
คุณลักษณะกระบอกลม กระบอกสูบ || รุ่น SIF, SCF Series (with valve)
- ขนาดความโตของกระบอก(Bore size )ตั้งแต่ 32 , 40 , 50 , 63 , 80 และ 100 mm. มีให้เลือกใช้ตามลักษณะการใช้งานที่ต้องการ
- สามารถทนอุณหภูมิได้ตั้งแต่ -20~80 องศา C
- มีทั้งรุ่นที่มีแม่เหล็กและไม่มีแม่เหล็ก
- ตัวกระบอกทำด้วย อลูมิเนียม อัลลอยด์มีความแข็งแรง และทนต่อการกัดกร่อน
- สามารถนำไปติดตั้งคู่กับการใช้งานได้หลายแบบ และมีหลายรุ่นให้เลือกใช้ตามความเหมาะสม
- มีจุดที่จะยึดติดโช็คกันกระแทกได้ที่ตัวกระบอก เพื่อประหยัดพื่นที่หน้างาน
- วาล์วที่ใช้กับขนาดกระบอกตั้งแต่ 32, 40, 50 จะใช้รุ่น 4M210-06 และ 4M210-08
- วาล์วที่ใช้กับขนาดกระบอกตั้งแต่ 63, 80, 100 จะใช้รุ่น 4M310-08 และ 4M310-10
- มีขนาดของรูต่อใช้งานตั้งแต่ 1หุน(1/8”) , 2หุน(1/4”) , 3หุน(3/8”) และ 4หุน(1/2”)
- ชุดติดตั้งกระบอก(Mounting) ที่ใช้ร่วมกันคือ FA, FB, CA, CR, CB, TC และ LB
- แบบยึดติดฐาน (LB)
- แบบติดตั้งหน้าแปลนด้านหน้า (FA)
- แบบติดตั้งหน้าแปลนด้านหลัง (FB)
- แบบติดท้ายกระบอกชนิดหูเดี่ยว (CA)
- แบบติดท้ายกระบอกชนิดหูคู่ (CB)
- แบบติดตั้งตรงกลางกระบอกพร้อมแกน (TC) ใช้ร่วมกับ ฐานยึดแกน (TF)
- สามารถเลือกชุดติดตั้งปลายแกนกระบอก ขึ้นอยู่กับลักษณะของ อุปกรณ์ที่ไปใช้ต่อร่วมด้วย
Cylinder specification | ||||||
---|---|---|---|---|---|---|
Bore size(mm) | 32 | 40 | 50 | 63 | 80 | 100 |
Acting type | Double acting | |||||
Fluid | Air(to be filtered by 40 µ m filter element) | |||||
Mounting type (SIF) | Basic FA FB CA CB LB TC TCM1 TCM2 | |||||
Mounting type (SCF) | Basic FA FB CA CB LB TC TCM1 | |||||
Operating pressure | 0.1-1.0MPa (15-145psi) (1.0-10.0bar) | |||||
Proof pressure | 1.5MPa (215psi) (15bar) | |||||
Temperature °C | -20 ~ 80 | |||||
Speed range mrn/s | 30-800 | |||||
Stroke tolerance | 0~250+1·0 251~1000 +1·4 1001~1500+1·8 | |||||
Cushion type | Variable cushion | |||||
Adjustable cushion (SIF) | 27 | 30 | 36 | |||
Adjustable cushion (SCF) | 21 | 28 | 29 | |||
Port size | 1/8" | 1/4" | 3/8" | 1/2" | ||
PU tube size (ODXID) | Ø8 x Ø5 | Ø10 x Ø6.5 |
Solenoid valve specification | ||
---|---|---|
Model | 4M210-06 & 4M210-08 | 4M310-08 & 4M310-10 |
Fluid | Air(to be filtered by 40 m filter element) | |
Acting type | Internal piloted | |
Portsize (1) | ln=Exhaust=1/8" & ln=1/4" Exhaust=1/8" |
ln=Exhaust=1/4" & ln=PT3/8 Exhaust=1/4" |
Orifice size | 4M210-06: 14.0mm2(Cv-0.78) 4M210-08: 16.0mm2(Cv=0.89) |
4M310-08: 25.0mm2(Cv=1.40) 4M310-10: 30.0mm2(Cv=1.68) |
Valve type | 5 port 2 position | |
Operating pressure | 0.15~0.8MPa (21~114psi) | |
Proof pressure | 1.5MPa (215psi) | |
Temperature °C | -20~70 | |
Body material | Aluminum alloy | |
Lubrication (2) | Not requined | |
Max. frequency (3) | 5 cycle/sec | 4 cycle/sec |
Coil specification | |
---|---|
Standard voltage | AC220V, AC110V, AC24V, DC24V, DC12V |
Scope voltage | AC: ±15% DC: ±10% |
Power consumption | AC: 3.5VA DC: 3.0W |
Protection | IP65(DIN40050) |
Temperature classification | B Class |
Electrical entry | Terminal, Grommet |
Activating time | 0.05 sec and below |
(1) PT thread, NPT thread and G thread are available.
(2) It cann't stop in the midway of lubricating. Lubricants like ISO VG32 or equivalent are recommended.
(3) The maximum actuation frequency is in the no-load state.
Add) Refer to P403-426 for detail of sensor switch.