OMRON Photoelectric Sensor - ZX1 series
English
ไทย
Photoelectric Displacement Sensor - ZX1 series
Download PDF
Model Numbers
Specifications
Dimensions
Features
Model Numbers | Photoelectric Displacement Sensor - ZX1 series
Sensors
| Appearance | Connection method | Cable length | Sensing distance | Model | |
|---|---|---|---|---|---|
| NPN output | PNP output | ||||
 |
Pre-wired | 2 m |  |
ZX1-LD50A61 2M * | ZX1-LD50A81 2M * |
| 5 m | ZX1-LD50A61 5M | ZX1-LD50A81 5M | |||
| Pre-wired connector | 0.5 m | ZX1-LD50A66 0.5M | ZX1-LD50A86 0.5M | ||
| Pre-wired | 2 m |  |
ZX1-LD100A61 2M * | ZX1-LD100A81 2M * | |
| 5 m | ZX1-LD100A61 5M | ZX1-LD100A81 5M | |||
| Pre-wired connector | 0.5 m | ZX1-LD100A66 0.5M | ZX1-LD100A86 0.5M | ||
 |
Pre-wired | 2 m |  |
ZX1-LD300A61 2M * | ZX1-LD300A81 2M * |
| 5 m | ZX1-LD300A61 5M | ZX1-LD300A81 5M | |||
| Pre-wired connector | 0.5 m | ZX1-LD300A66 0.5M | ZX1-LD300A86 0.5M | ||
| Pre-wired | 2 m |  |
ZX1-LD600A61 2M * | ZX1-LD600A81 2M * | |
| 5 m | ZX1-LD600A61 5M | ZX1-LD600A81 5M | |||
| Pre-wired connector | 0.5 m | ZX1-LD600A66 0.5M | ZX1-LD600A86 0.5M | ||
Sensors with Class 1 lasers are also available. Add an “L” to the end of the model number when ordering. (Example: ZX1-LD50A61L 2M)
Accessories (sold separately)
Extension Cables for Pre-wired Connector Models
An Extension Cable is not provided with the Sensor. Order an Extension Cable separately.
| Cable length | Model |
|---|---|
| 10 m | ZX0-XC10R |
| 20 m | ZX0-XC20R |
Mounting Brackets
A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.
| Applicable sensors | Appearance | Model | Remarks |
|---|---|---|---|
| ZX1-LD50[] ZX1-LD100[] |
 |
E39-L180 | Mounting Bracket: 1 Nut plate: 1 Phillips screws (M3 × 30): 2 |
| ZX1-LD300[] ZX1-LD600[] |
 |
E39-L181 | Mounting Bracket: 1 Nut plate: 1 Phillips screws (M4 × 35): 2 |
Specifications | Photoelectric Displacement Sensor - ZX1 series
| Model | NPN output | ZX1-LD50A61 ZX1-LD50A66 | ZX1-LD100A61 ZX1-LD100A66 | ZX1-LD300A61 ZX1-LD300A66 | ZX1-LD600A61 ZX1-LD600A66 |
|---|---|---|---|---|---|
| PNP output | ZX1-LD50A81 ZX1-LD50A86 | ZX1-LD100A81 ZX1-LD100A86 | ZX1-LD300A81 ZX1-LD300A86 | ZX1-LD600A81 ZX1-LD600A86 | |
| Measurement range | 50 ± 10 mm | 100 ± 35 mm | 300 ± 150 mm | 600 ± 400 mm | |
| Light source (wave length) | Visible-light semiconductor laser (wavelength: 660 nm, 1 mW max., IEC/EN Class 2, FDA Class 2 *1) |
||||
| Spot diameter (typical) (Defined at the measurement center distance) *2 |
0.17 mm dia. | 0.33 mm dia. | 0.52 mm dia. | 0.56 mm dia. | |
| Power consumption | 2,500 mW max. (105 mA max. at 24 VDC, 210 mA max. at 12 VDC) | ||||
| Current consumption | 250 mA max. (at power supply voltage 10 VDC) | ||||
| Control output | Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 1 V max. (load current 10 mA or less), 2 V max. (load current of 10 to 100 mA)) |
||||
| Analog output | Current output: 4 to 20 mA, maximum load resistance: 300 Ω (The output is 20 mA for the nearest point in the measurement range in respect to the Sensor and 4 mA for the farthest point.) |
||||
| Functions | Smart tuning, keep function, scaling setting, background removal, OFF-delay timer, ON-delay timer, one-shot timer, ON/OFF-delay timer, zero reset, area output, eco function, hysteresis width setting, and setting initialization |
||||
| Indicators | Digital display (red), output indicator (OUT1, OUT2) (orange), zero reset indicator (orange), menu indicator (orange), laser ON indicator (green), and smart tuning indicator (blue) |
||||
| Response time | Judgment output | Super-high-speed (SHS) Mode: 1 ms High-speed (HS) Mode: 10 ms Standard (Stnd) Mode: 100 ms |
|||
| Laser OFF input | 200 ms max. | ||||
| Zero reset input | 200 ms max. | ||||
| Temperature characteristic *3 | 0.03% F.S./°C | 0.04% F.S./°C | |||
| Linearity *4 | ±0.15% F.S. | ±0.25% F.S. | ±0.25% F.S. (200 to 600 mm) ±0.5% F.S. (entire range) |
||
| Resolution *5 | 2 μm | 7 μm | 30 μm | 80 μm | |
| Ambient illumination | Illumination on received light surface: 7,500 lx or less (incandescent light) |
Illumination on received light surface: 5,000 lx or less (incandescent light) |
|||
| Ambient temperature | Operating: -10 to +55°C, Storage: -15 to +70°C (with no icing or condensation) | ||||
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz, 1 minute | ||||
| Vibration resistance (destruction) | 10 to 55 Hz, 1.5-mm double amplitude, 2 hours each in X, Y, and Z directions | ||||
| Shock resistance (destruction) | 500 m/s2 3 times each in X, Y, and Z directions | ||||
| Degree of protection *6 | IEC 60529, IP67 | ||||
| Connection method *7 | Pre-wired model (Standard cable length: 2 m, 5 m) Pre-wired connector model (Standard cable length: 0.5 m) |
||||
| Weight (packed state/ sensor only) | Pre-wired models (2 m) | Approx. 240 g/Approx. 180 g | Approx. 270 g/Approx. 210 g | ||
| Pre-wired models (5 m) | Approx. 450 g/Approx. 330 g | Approx. 480 g/Approx. 360 g | |||
| Pre-wired connector models (0.5 m) |
Approx. 170 g/Approx. 110 g | Approx. 200 g/Approx. 140 g | |||
| Materials | Case and cover: PBT (polybutylene terephthalate), Optical window: Glass, Cable: PVC, Mounting hole part: SUS303 |
||||
| Accessories | Instruction sheet and Laser warning label (English) | ||||
Note :
- False detection outside the measurement range can occur in the case of an object with high reflectance.
- Refer to the below for the ratings and specifications of Sensors with Class 1 lasers.
- Classified as Class 2 by IEC60825-1 criteria in accordance with the FDA standard previsions of Laser Notice No. 50. CDRH registration has been completed.(Center for Devices and Radiological Health) (Accession Number: 1210041)
- Spot diameter: Defined as 1/e2 (13.5%) of the central intensity at the measurement center distance. False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in comparison to the target object. Accurate measurements may not be possible for workpieces that are smaller than the spot diameter.
- Temperature characteristic: Value for the case the space between the sensor and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)
- Linearity: Indicates the error with respect to the ideal straight line of the displacement output in the case of measuring Omron’s standard target object (white ceramic) at a temperature of 25 °C. Linearity and measured value may vary depending on target object.
- Resolution: Defined in Standard Mode for Omron’s standard target object (white ceramic) after executing Smart Tuning. The resolution indicates the repetition accuracy for a still workpiece. Not an indication of the distance accuracy. Resolution performance may not be satisfied in a strong electromagnetic field.
- IP67 protection applies to the connector on pre-wired connector models if an extension cable is connected.
- Use a Pre-wired Connector Model together with an Extension Cable (10 m or 20 m).
Ratings and Specifications of Sensors with Class 1 lasers (ZX1-LD[]L)
The ratings and specifications that are different from those of the Sensors with Class 2 lasers are given below.
| Model | ZX1-LD50A61L/ZX1-LD50A81L ZX1-LD100A61L/ZX1-LD100A81L | ZX1-LD300A61L/ZX1-LD300A81L ZX1-LD600A61L/ZX1-LD600A81L |
|---|---|---|
| FDA Class | Class1 0.24mW max. | |
| IEC/EN Class | Class1 0.24mW max. | |
| Functions | No scaling setting, no hysteresis width setting | |
| Ambient illumination | Illumination on received light surface 5,000 lx or less (incandescent light) |
Illumination on received light surface 2,500 lx or less (incandescent light) |
| Connection method | Pre-wired model (2 m) | |
| Accessories | Instruction sheet and Explanatory label (English), FDA certification label | |
Accession Number: 1210041
Dimensions | Photoelectric Displacement Sensor - ZX1 series
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
Pre-wired Models
ZX1-LD50A61(L)
ZX1-LD50A81(L)
ZX1-LD100A61(L)
ZX1-LD100A81(L)
Pre-wired Connector Models
ZX1-LD50A66
ZX1-LD50A86
ZX1-LD100A66
ZX1-LD100A86
* ZX1-LD50: L = 50, A = 21° ZX1-LD100: L = 100, A = 11.5°
Pre-wired Models
ZX1-LD300A61(L)
ZX1-LD300A81(L)
ZX1-LD600A61(L)
ZX1-LD600A81(L)
Pre-wired Connector Models
ZX1-LD300A66
ZX1-LD300A86
ZX1-LD600A66
ZX1-LD600A86
* ZX1-LD300: L = 300, A = 6.6° ZX1-LD600: L = 600, A = 3.4°
Display, Indicators, and Controls
Pre-wired connector
Accessories (sold separately)
Extension Cables for Pre-wired Connector Models
ZX0-XC10R (10 m)
ZX0-XC20R (20 m)
* Cable length (L) is as follows. ZX0-XC10R: 10 m, ZX0-XC20R: 20 m
Mounting Bracket for ZX1-LD50[]/ZX1-LD100[]
E39-L180
Material : Stainless steel (SUS304)
Thickness : 2.0 mm
Accessories : Two phillips screws (M3×30, P = 0.5, Stainless steel) and one nut plate
Mounting Bracket for ZX1-LD300[]/ZX1-LD600[]
E39-L181
Material: Stainless steel (SUS304)
Thickness: 2.0 mm
Accessories: Two phillips screws (M4×35, P = 0.7, Stainless steel) and one nut plate
Installation Method (ZX1-LD50[]/ZX1-LD100[])
Using E39-L180 Mounting Bracket
Installation Method (ZX1-LD300[]/ZX1-LD600[])
Using E39-L181 Mounting Bracket
Features | Photoelectric Displacement Sensor - ZX1 series
- A resolution of 0.002 mm thats suitable for simple measurements
- Stable measurements for any type of workpiece
- Models available with four different distance specifications.
- Long-distance model for up to 1,000 mm
Properties | Photoelectric Displacement Sensor - ZX1 series
| Photoelectric Displacement Sensor | ZX1 |
|---|---|
| Measurement range | 50±10, 100±35, 300±150, 600±400 mm |
| Power consumption | 2,500 mW max |
| Analog output | 4 to 20 mA |
| Response time | 1 ms, 10 ms, 100 ms |
| Resolution | 2 μm, 7 μm, 30 μm, 80 μm |
| Degree of protection | IP67 |
| Materialscover | PBT (polybutylene terephthalate ) |
Photoelectric Displacement Sensor - ZX1 series
ดาวน์โหลดไฟล์ PDF เลือกรุ่นสินค้า
ข้อมูลทางเทคนิค
ขนาด
คุณสมบัติ
เลือกรุ่นสินค้า | Photoelectric Displacement Sensor - ZX1 series
เซ็นเซอร์
| ลักษณะ | วิธีการเชื่อมต่อ | ความยาวสาย | ระยะการตรวจจับ | รุ่นสินค้า | |
|---|---|---|---|---|---|
| เอาต์พุต NPN | เอาต์พุต PNP | ||||
|
มีสายในตัว | 2 ม. | |
ZX1-LD50A61 2M * | ZX1-LD50A81 2M * |
| 5 ม. | ZX1-LD50A61 5M | ZX1-LD50A81 5M | |||
| คอนเนคเตอร์มีสายในตัว | 0.5 ม. | ZX1-LD50A66 0.5M | ZX1-LD50A86 0.5M | ||
| มีสายในตัว | 2 ม. | |
ZX1-LD100A61 2M * | ZX1-LD100A81 2M * | |
| 5 ม. | ZX1-LD100A61 5M | ZX1-LD100A81 5M | |||
| คอนเนคเตอร์มีสายในตัว | 0.5 ม. | ZX1-LD100A66 0.5M | ZX1-LD100A86 0.5M | ||
|
มีสายในตัว | 2 ม. | |
ZX1-LD300A61 2M * | ZX1-LD300A81 2M * |
| 5 ม. | ZX1-LD300A61 5M | ZX1-LD300A81 5M | |||
| คอนเนคเตอร์มีสายในตัว | 0.5 m | ZX1-LD300A66 0.5M | ZX1-LD300A86 0.5M | ||
| มีสายในตัว | 2 ม. | |
ZX1-LD600A61 2M * | ZX1-LD600A81 2M * | |
| 5 ม. | ZX1-LD600A61 5M | ZX1-LD600A81 5M | |||
| คอนเนคเตอร์มีสายในตัว | 0.5 ม. | ZX1-LD600A66 0.5M | ZX1-LD600A86 0.5M | ||
นอกจากนี้ยังมีเซ็นเซอร์ที่มีเลเซอร์คลาส 1 เพิ่ม“L” ต่อท้ายหมายเลขรุ่นเมื่อสั่งซื้อ (ตัวอย่าง: ZX1-LD50A61L 2M)
อุปกรณ์เสริม (แยกจำหน่าย)
สายต่อสำหรับรุ่นคอนเนคเตอร์แบบมีสายในตัว
ไม่มีสายต่อพ่วงมาพร้อมกับเซนเซอร์ สั่งซื้อสายต่อแยกต่างหาก
| ความยาวสาย | รุ่นสินค้า |
|---|---|
| 10 m | ZX0-XC10R |
| 20 m | ZX0-XC20R |
Mounting Brackets
A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.
| เซนเซอร์ที่ใช้งานได้ | ลักษณะ | รุ่น | หมายเหตุ |
|---|---|---|---|
| ZX1-LD50[] ZX1-LD100[] |
|
E39-L180 | ขายึด: 1 ฐานยึด: 1 สกรูหัวแฉก(M3 × 30): 2 |
| ZX1-LD300[] ZX1-LD600[] |
|
E39-L181 | ขายึด: 1 ฐานยึด: 1 สกรูหัวแฉก (M4 × 35): 2 |
ข้อมูลทางเทคนิค | Photoelectric Displacement Sensor - ZX1 series
| Model | NPN output | ZX1-LD50A61 ZX1-LD50A66 | ZX1-LD100A61 ZX1-LD100A66 | ZX1-LD300A61 ZX1-LD300A66 | ZX1-LD600A61 ZX1-LD600A66 |
|---|---|---|---|---|---|
| PNP output | ZX1-LD50A81 ZX1-LD50A86 | ZX1-LD100A81 ZX1-LD100A86 | ZX1-LD300A81 ZX1-LD300A86 | ZX1-LD600A81 ZX1-LD600A86 | |
| Measurement range | 50 ± 10 mm | 100 ± 35 mm | 300 ± 150 mm | 600 ± 400 mm | |
| Light source (wave length) | Visible-light semiconductor laser (wavelength: 660 nm, 1 mW max., IEC/EN Class 2, FDA Class 2 *1) |
||||
| Spot diameter (typical) (Defined at the measurement center distance) *2 |
0.17 mm dia. | 0.33 mm dia. | 0.52 mm dia. | 0.56 mm dia. | |
| Power consumption | 2,500 mW max. (105 mA max. at 24 VDC, 210 mA max. at 12 VDC) | ||||
| Current consumption | 250 mA max. (at power supply voltage 10 VDC) | ||||
| Control output | Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 1 V max. (load current 10 mA or less), 2 V max. (load current of 10 to 100 mA)) |
||||
| Analog output | Current output: 4 to 20 mA, maximum load resistance: 300 Ω (The output is 20 mA for the nearest point in the measurement range in respect to the Sensor and 4 mA for the farthest point.) |
||||
| Functions | Smart tuning, keep function, scaling setting, background removal, OFF-delay timer, ON-delay timer, one-shot timer, ON/OFF-delay timer, zero reset, area output, eco function, hysteresis width setting, and setting initialization |
||||
| Indicators | Digital display (red), output indicator (OUT1, OUT2) (orange), zero reset indicator (orange), menu indicator (orange), laser ON indicator (green), and smart tuning indicator (blue) |
||||
| Response time | Judgment output | Super-high-speed (SHS) Mode: 1 ms High-speed (HS) Mode: 10 ms Standard (Stnd) Mode: 100 ms |
|||
| Laser OFF input | 200 ms max. | ||||
| Zero reset input | 200 ms max. | ||||
| Temperature characteristic *3 | 0.03% F.S./°C | 0.04% F.S./°C | |||
| Linearity *4 | ±0.15% F.S. | ±0.25% F.S. | ±0.25% F.S. (200 to 600 mm) ±0.5% F.S. (entire range) |
||
| Resolution *5 | 2 μm | 7 μm | 30 μm | 80 μm | |
| Ambient illumination | Illumination on received light surface: 7,500 lx or less (incandescent light) |
Illumination on received light surface: 5,000 lx or less (incandescent light) |
|||
| Ambient temperature | Operating: -10 to +55°C, Storage: -15 to +70°C (with no icing or condensation) | ||||
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz, 1 minute | ||||
| Vibration resistance (destruction) | 10 to 55 Hz, 1.5-mm double amplitude, 2 hours each in X, Y, and Z directions | ||||
| Shock resistance (destruction) | 500 m/s2 3 times each in X, Y, and Z directions | ||||
| Degree of protection *6 | IEC 60529, IP67 | ||||
| Connection method *7 | Pre-wired model (Standard cable length: 2 m, 5 m) Pre-wired connector model (Standard cable length: 0.5 m) |
||||
| Weight (packed state/ sensor only) | Pre-wired models (2 m) | Approx. 240 g/Approx. 180 g | Approx. 270 g/Approx. 210 g | ||
| Pre-wired models (5 m) | Approx. 450 g/Approx. 330 g | Approx. 480 g/Approx. 360 g | |||
| Pre-wired connector models (0.5 m) |
Approx. 170 g/Approx. 110 g | Approx. 200 g/Approx. 140 g | |||
| Materials | Case and cover: PBT (polybutylene terephthalate), Optical window: Glass, Cable: PVC, Mounting hole part: SUS303 |
||||
| Accessories | Instruction sheet and Laser warning label (English) | ||||
Note :
- False detection outside the measurement range can occur in the case of an object with high reflectance.
- Refer to the below for the ratings and specifications of Sensors with Class 1 lasers.
- Classified as Class 2 by IEC60825-1 criteria in accordance with the FDA standard previsions of Laser Notice No. 50. CDRH registration has been completed.(Center for Devices and Radiological Health) (Accession Number: 1210041)
- Spot diameter: Defined as 1/e2 (13.5%) of the central intensity at the measurement center distance. False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in comparison to the target object. Accurate measurements may not be possible for workpieces that are smaller than the spot diameter.
- Temperature characteristic: Value for the case the space between the sensor and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)
- Linearity: Indicates the error with respect to the ideal straight line of the displacement output in the case of measuring Omron’s standard target object (white ceramic) at a temperature of 25 °C. Linearity and measured value may vary depending on target object.
- Resolution: Defined in Standard Mode for Omron’s standard target object (white ceramic) after executing Smart Tuning. The resolution indicates the repetition accuracy for a still workpiece. Not an indication of the distance accuracy. Resolution performance may not be satisfied in a strong electromagnetic field.
- IP67 protection applies to the connector on pre-wired connector models if an extension cable is connected.
- Use a Pre-wired Connector Model together with an Extension Cable (10 m or 20 m).
Ratings and Specifications of Sensors with Class 1 lasers (ZX1-LD[]L)
The ratings and specifications that are different from those of the Sensors with Class 2 lasers are given below.
| Model | ZX1-LD50A61L/ZX1-LD50A81L ZX1-LD100A61L/ZX1-LD100A81L | ZX1-LD300A61L/ZX1-LD300A81L ZX1-LD600A61L/ZX1-LD600A81L |
|---|---|---|
| FDA Class | Class1 0.24mW max. | |
| IEC/EN Class | Class1 0.24mW max. | |
| Functions | No scaling setting, no hysteresis width setting | |
| Ambient illumination | Illumination on received light surface 5,000 lx or less (incandescent light) |
Illumination on received light surface 2,500 lx or less (incandescent light) |
| Connection method | Pre-wired model (2 m) | |
| Accessories | Instruction sheet and Explanatory label (English), FDA certification label | |
Accession Number: 1210041
ขนาด | Photoelectric Displacement Sensor - ZX1 series
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
Pre-wired Models
ZX1-LD50A61(L)
ZX1-LD50A81(L)
ZX1-LD100A61(L)
ZX1-LD100A81(L)
Pre-wired Connector Models
ZX1-LD50A66
ZX1-LD50A86
ZX1-LD100A66
ZX1-LD100A86
* ZX1-LD50: L = 50, A = 21° ZX1-LD100: L = 100, A = 11.5°
Pre-wired Models
ZX1-LD300A61(L)
ZX1-LD300A81(L)
ZX1-LD600A61(L)
ZX1-LD600A81(L)
Pre-wired Connector Models
ZX1-LD300A66
ZX1-LD300A86
ZX1-LD600A66
ZX1-LD600A86
* ZX1-LD300: L = 300, A = 6.6° ZX1-LD600: L = 600, A = 3.4°
Display, Indicators, and Controls
Pre-wired connector
Accessories (sold separately)
Extension Cables for Pre-wired Connector Models
ZX0-XC10R (10 m)
ZX0-XC20R (20 m)
* Cable length (L) is as follows. ZX0-XC10R: 10 m, ZX0-XC20R: 20 m
Mounting Bracket for ZX1-LD50[]/ZX1-LD100[]
E39-L180
Material : Stainless steel (SUS304)
Thickness : 2.0 mm
Accessories : Two phillips screws (M3×30, P = 0.5, Stainless steel) and one nut plate
Mounting Bracket for ZX1-LD300[]/ZX1-LD600[]
E39-L181
Material: Stainless steel (SUS304)
Thickness: 2.0 mm
Accessories: Two phillips screws (M4×35, P = 0.7, Stainless steel) and one nut plate
Installation Method (ZX1-LD50[]/ZX1-LD100[])
Using E39-L180 Mounting Bracket
Installation Method (ZX1-LD300[]/ZX1-LD600[])
Using E39-L181 Mounting Bracket
คุณสมบัติ | Photoelectric Displacement Sensor - ZX1 series
- ความละเอียด 0.002 mm เหมาะสำหรับวัดแบบธรรมดา
- วัดได้อย่างเสถียรสำหรับทุกชิ้นทุกประเภท
- รุ่นที่สามารถใช้ได้กับข้อกำหนดระยะทางที่แตกต่างกันทั้งสี่
- รุ่นระยะไกลสูงสุด 1,000 mm
ข้อมูลจำเพาะ | Photoelectric Displacement Sensor - ZX1 series
| Photoelectric Displacement Sensor | ZX1 |
|---|---|
| ช่วงการวัด | 50±10, 100±35, 300±150, 600±400 mm |
| การใช้พลังงาน | สูงสุด 2,500 มิลลิวัตต์ |
| เอาต์พุตอนาล็อก | 4 ถึง 20 มิลลิแอมป์ |
| เวลาตอบสนอง | 1, 10, 100 มิลลิวินาที |
| ความละเอียด | 2, 7, 30, 80 ไมโครเมตร |
| ระดับการป้องกัน | IP67 |
| วัสดุภายนอก | PBT (โพลีบิวทิลีนเทเรฟทาฮาเลต) |
Technology Instrument 
T.U Pack 
Your Lift