OT OilTechnology offers a valid and complete range of flow dividers group 1.
DANA Flow Divider - OT100
Feature | DANA Flow Divider OT100
The OT100 flow dividers can be used as flow equilizators (with same displacement on each section) or as flow dividers (with different sections displacement). The OT100 flow dividers can be supplied with reset valves to correct any small mistake between two or more cylinders cycle. The OT100 flow dividers can be supplied with section displacements from 1,55 to 5,55 cc/rev. These are the OT100 flow dividers working parameters.
Technical | DANA Flow Divider OT100
|Suggested Filtration||△P > 150 bar||△P < 150 bar|
|Contamunation class NAS 1638||10||8|
|Contamination class ISO 4406||17/14||19/16|
|To be obtained with Filter 3 x 75||10-3 m||25-3 m|
|Minimum Viscosity||10 mm2/s|
|Maximum Viscosity||100 mm2/s|
|Suggeated Viscosity||20 mm2/s / 100 mm/s|
|Suggested Temperature||30/50 °C|