DIRECTIONAL SEAT VALVE รุ่น E-.SE6

3/2 and 4/2 directional seat valves with solenoid actuation, for water

รายละเอียด directional seat valves รุ่น E-.SE6

• Size 6
• Component series 7X
• Maximum operating pressure 630 bar
• Maximum flow 25l/min

Features

• Direct operated directional seat valve with solenoid actuation
• Porting pattern according to ISO 4401-03-02-0-05 (with locating hole)
• Air-gap DC solenoid
• Electrical connection as individual connection
• Blocked port is leak-free closed
• Safe switching also with longer standstill periods under pressure

---

Type code

01		02	03	04	05	06		07	08	09	10	11	12	13	14	15
	/		SE	6		7X	/					K4				*

01	Water			W
02	3 main ports			3
	4 main ports			4
03	Seat valve, electrically operated			SE
04	Size 6			6
05	Main ports	3	4
	Symbols
		●	–	U
		●	–	C
		–	●	D
		–	●	Y
	● = available
06	Component series 70 to 79 (70 to 79: unchanged installation and connection dimensions)			7X
07	With spring return			no code
	With detent			F
08	Operating pressure 420 bar			420 bar
	Operating pressure up to 630 bar			630 bar
09	Direct voltage 24 V			G24
	Nominal voltage 96 V at DC solenoid with operation with AC voltage mains (AC voltage mains 110 V/120 V – 50/60 Hz with an admissible voltage tolerance of +/- 10 %)			G96
	Nominal voltage 110 V at DC solenoid with operation with AC voltage mains (AC voltage mains 110 V/120 V – 50/60 Hz with an admissible voltage tolerance of +/-10 %)			G110
	Nominal voltage 205 V at DC solenoid with operation with AC voltage mains (AC voltage mains 230 V – 50/60 Hz with an admissible voltage tolerance of +/- 10 %)			G205 2)
	Further ordering codes for other voltages are provided in the technical data
10	With concealed manual override (standard)			N9
	Without manual override			no code
Electrical connection
11	Without mating connector, individual connection with connector according to DIN EN 175301-803			K4 1)
12	Without check valve insert, without throttle insert			no code
With check valve insert			P
Throttle Ø 0,8 mm			B08
Throttle Ø 0,8 mm			B10
Throttle Ø 1.2 mm			B12
Throttle Ø 1.5 mm			B15
Throttle Ø 1.8 mm			B12
Throttle Ø 2.0 mm			B20
Seal material
13	NBR seals			no code
	FKM seals (other seals upon request)			V
	Observe compatibility of seals with hydraulic fluid used.
14	Without locating hole			no code
	With locating hole and locking pin ISO 8752-3x8-St			/62
15	Further details in the plain text			*

Included in the scope of delivery:

1. ) Mating connectors must be ordered separately.
2. For connection to the AC voltage mains, a DC solenoid valve must be used, which is controlled via a rectifier (see ordering codes for the AC voltage mains).

A mating connector with integrated rectifier can be used (separate order)

Model	Code
W-3SE 6 C7X/420G110N9K4	R901406723
W-3SE 6 C7X/420G125N9K4	R901185723
W-3SE 6 C7X/420G205N9K4	R901184003
W-3SE 6 C7X/420G205N9K4/B08	R901203870
W-3SE 6 C7X/420G24N9K4	R901138504
W-3SE 6 C7X/420G24N9K4/B08	R901203846
W-3SE 6 C7X/420G24N9K4/B10	R901180392
W-3SE 6 C7X/420G24N9K4/B12	R901153597
W-3SE 6 C7X/420G24N9K4/B15	R901138804
W-3SE 6 C7X/420G96N9K4	R901292674
W-3SE 6 C7X/630G205N9K4	R901216919
W-3SE 6 C7X/630G24N9K4	R901193905
W-3SE 6 C7X/630G24N9K4/B08	R901203863
W-3SE 6 C7X/630G48N9K4	R901204601
W-3SE 6 C7X/630G96N9K4	R901138661
W-3SE 6 C7X/F420G24N9K4	R901277326
W-3SE 6 C7X=420G24N9K4	R901355320
W-3SE 6 U7X/420G110N9K4	R901406728
W-3SE 6 U7X/420G125N9K4	R901179629
W-3SE 6 U7X/420G205N9K4	R901321776
W-3SE 6 U7X/420G24N9K4	R901138702
W-3SE 6 U7X/420G24N9K4/B08	R901203851
W-3SE 6 U7X/420G24N9K4/B10	R901138732
W-3SE 6 U7X/420G24N9K4/B12	R901153444
W-3SE 6 U7X/420G24N9K4/B15	R901138743
W-3SE 6 U7X/630G110N9K4/B15	R901410216
W-3SE 6 U7X/630G24N9K4	R901216089
W-3SE 6 U7X/630G24N9K4/B08	R901203864
W-3SE 6 U7X/630G24N9K4/B12	R901214565
W-3SE 6 U7X/630G24N9K4/B15	R901200400
W-3SE 6 U7X/630G48N9K4	R901204595
W-3SE 6 U7X=630G24N9K4/B12	R901355315
W-4SE 6 D7X/420G125N9K4	R901182881
W-4SE 6 D7X/420G24N9K4	R901179659
W-4SE 6 D7X/F420G24N9K4	R901262043

---